Home> Products> Spray Tower Scrubber Column> Flue Gas Purification Desulfurizer Tower
Flue Gas Purification Desulfurizer Tower
Flue Gas Purification Desulfurizer Tower
Flue Gas Purification Desulfurizer Tower
Flue Gas Purification Desulfurizer Tower
Flue Gas Purification Desulfurizer Tower
Flue Gas Purification Desulfurizer Tower

Flue Gas Purification Desulfurizer Tower

Get Latest Price
Payment Type:L/C,T/T,D/P,Paypal,Money Gram,Western Union
Incoterm:FOB,CFR,CIF,EXW,FCA,CPT,CIP
Transportation:Ocean,Land,Air
Port:Tianjin,Shanghai,Guangzhou
Product Attributes

Model No.WS-04

BrandJY

ColorWhite

Warranty1 Year

MaterialsPP/stainless Steel

UseWaste Gas Purfication

Product NameFlue Gas Purification Desulfurizer Tower

Packaging & Delivery
Package Type : Export standard wood case for bag house dust collector
Download :
Product Description


Wet scrubbers remove dust particles by capturing them in liquid droplets. 

The droplets are then collected, the liquid dissolving or absorbing the pollutant gases. Any droplets that are in the scrubber inlet gas must be separated from the outlet gas stream by means of another device referred to as a mist eliminator or entrainment separator (these terms are interchangeable). Also, the resultant scrubbing liquid must be treated prior to any ultimate discharge or being reused in the plant. More products, Industrial Dust Collector, Baghouse Dust CollectorSlide Gate Valve, Flap Valve, Butterfly Valve, Screw Flight, Screw Conveyor



Product description

wet scrubber



Pictures of product

wet scrubber tower

wet scrubber spray tower

Structure

The packing layer in the spray tower is used as a mass transfer device for the gas-liquid two-phase contact member. A packing support plate is installed at the bottom of the packing tower, and the packing is placed on the supporting plate in a random manner. A packing pressure plate is installed above the packing to prevent it from being blown by the updraft. The spray liquid from the spray tower sprays from the top of the tower to the filler through the liquid distributor, and flows down along the surface of the filler. The gas is sent in from the bottom of the tower, and after being distributed by the gas distribution device, it passes through the gap of the packing layer in a countercurrent flow with the liquid. On the packing surface, the two phases of gas and liquid are in close contact for mass transfer. When the liquid flows downward along the packing layer, a wall flow phenomenon sometimes occurs. The wall flow effect causes the gas and liquid phases to be unevenly distributed in the packing layer, thereby reducing the mass transfer efficiency. Therefore, the filling layer in the spray tower is divided into two sections, and a redistribution device is arranged in the middle to spray on the lower filling layer after redistribution.

wet scrubber theory

Features

1.Dust removal and desulfurization efficiency is high. When alkaline washing water is used, the desulfurization efficiency can reach 85%

2. The equipment occupies less land and is easy to install

3. Low water and power consumption indicators

4. Corrosion resistance, no wear, and long service life

5. Reliable equipment operation, simple and convenient maintenance


Installation

1. Regulation of circulating water volume: It is determined by the spray tower water supply pump. When one boiler is running, one can be turned on. When two or three are running at the same time in winter, both water pumps are turned on, and the mud pump is at its flow rate. It should be adjusted according to the flow of the circulating pump to make them equal

2. Dosing volume in the dosing tank in the spray tower: When operating a boiler, add 2 bags of alkali and 5 bags of slaked lime. If two or three units are operated in winter, the dose can be increased by a corresponding multiple

3. The spray tower sedimentation tank should be cleaned frequently, once a week in summer and once every three days in winter

4. When the gray water separator discharges sewage, it is discharged once per shift, and the sewage valve should be opened separately until clear water is discharged

5. The above rotating parts should be frequently checked and filled with oil, and the faults should be eliminated in time to ensure the desulfurization effect of the spray tower

6. Pay attention to safety when adding medicine on the stairs and down stairs, and have independent security and mutual security awareness

7. After the work is completed, the sanitation should be cleaned up in time so that people can clear the site


Applications

wet scrubber application

More products: 

  Baghouse Dust Collector, Cyclone Dust Collector, Welding Fume Extractor, Fog Cannon, Bulk Material Handling Equipment


spray tower

spray tower scrubber


Home> Products> Spray Tower Scrubber Column> Flue Gas Purification Desulfurizer Tower
Send Inquiry
*
*

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Send