Home> Products> Industrial Dust Collector> Wet Scrubber> High Quality Waste Gas Wet Scrubbers
High Quality Waste Gas Wet Scrubbers
High Quality Waste Gas Wet Scrubbers
High Quality Waste Gas Wet Scrubbers
High Quality Waste Gas Wet Scrubbers
High Quality Waste Gas Wet Scrubbers
High Quality Waste Gas Wet Scrubbers
High Quality Waste Gas Wet Scrubbers
High Quality Waste Gas Wet Scrubbers
High Quality Waste Gas Wet Scrubbers

High Quality Waste Gas Wet Scrubbers

$3000≥1Set/Sets

Payment Type:L/C,T/T,D/P,Paypal,Money Gram,Western Union
Incoterm:FOB,CFR,CIF,EXW,FCA,CPT,CIP
Min. Order:1 Set/Sets
Transportation:Ocean,Land,Air
Port:Tianjin,Shanghai,Guangzhou
Product Attributes

Model No.Φ800MMX4000MM

BrandJY

ColorWhite

Warranty1 Year

MaterialsPP/stainless Steel

UseWaste Gas Purfication

Product NameHigh Quality Waste Gas Wet Scrubbers

Packaging & Delivery
Selling Units : Set/Sets
Package Type : Export standard wood case for bag house dust collector
Download :
Product Description

Drawing


Exhaust Gas Treatment Equipment - Washing Tower Parameter
Air volume(m³/h) Size(mm) THK(mm) Drain Outlet(mm) Water Tank Size(mm) Inlet and Outlet Size(mm) Pump(kw) Wind Resistance(Pa)
3000 800    8    DN32 600*700*H700      315 0.75 500
5000 1000    8    DN40 600*800*H700      400  1.5  500
8000 1200    8    DN40 600*1000*H700      500  2.2 500
10000 1500   10    DN40 700*1000*H700       550  2.2 500
12000 1600   10    DN50 700*1000*H700      600 3.75 500
15000 1800   10    DN50 700*1200*H700      650 3.75 500
20000 2000   10    DN50 700*1200*H700      750  5.5 500
25000 2200   10    DN50 700*1200*H700      950  5.5 600
30000 2500   12    DN65 700*1200*H700     1000  5.5 600
35000 2700   12    DN65 1000*700*H700     1100 7.5 600
40000 2900   12    DN65 1000*700*H700     1200 7.5 600
45000 3000   12    DN65 1000*700*H700     1250  7.5 600
1.This form is a common size and we can customize different sizes and requirements according to your needs.
2.The material is polypropylene.
3.Equipment design wind speed 1.8m/s

Product description

wet scrubber



Pictures of product

wet scrubber tower

wet scrubber spray tower

Structure

The packing layer in the spray tower is used as a mass transfer device for the gas-liquid two-phase contact member. A packing support plate is installed at the bottom of the packing tower, and the packing is placed on the supporting plate in a random manner. A packing pressure plate is installed above the packing to prevent it from being blown by the updraft. The spray liquid from the spray tower sprays from the top of the tower to the filler through the liquid distributor, and flows down along the surface of the filler. The gas is sent in from the bottom of the tower, and after being distributed by the gas distribution device, it passes through the gap of the packing layer in a countercurrent flow with the liquid. On the packing surface, the two phases of gas and liquid are in close contact for mass transfer. When the liquid flows downward along the packing layer, a wall flow phenomenon sometimes occurs. The wall flow effect causes the gas and liquid phases to be unevenly distributed in the packing layer, thereby reducing the mass transfer efficiency. Therefore, the filling layer in the spray tower is divided into two sections, and a redistribution device is arranged in the middle to spray on the lower filling layer after redistribution.

wet scrubber theory

Features

1.Dust removal and desulfurization efficiency is high. When alkaline washing water is used, the desulfurization efficiency can reach 85%

2. The equipment occupies less land and is easy to install

3. Low water and power consumption indicators

4. Corrosion resistance, no wear, and long service life

5. Reliable equipment operation, simple and convenient maintenance


Installation

1. Regulation of circulating water volume: It is determined by the spray tower water supply pump. When one boiler is running, one can be turned on. When two or three are running at the same time in winter, both water pumps are turned on, and the mud pump is at its flow rate. It should be adjusted according to the flow of the circulating pump to make them equal

2. Dosing volume in the dosing tank in the spray tower: When operating a boiler, add 2 bags of alkali and 5 bags of slaked lime. If two or three units are operated in winter, the dose can be increased by a corresponding multiple

3. The spray tower sedimentation tank should be cleaned frequently, once a week in summer and once every three days in winter

4. When the gray water separator discharges sewage, it is discharged once per shift, and the sewage valve should be opened separately until clear water is discharged

5. The above rotating parts should be frequently checked and filled with oil, and the faults should be eliminated in time to ensure the desulfurization effect of the spray tower

6. Pay attention to safety when adding medicine on the stairs and down stairs, and have independent security and mutual security awareness

7. After the work is completed, the sanitation should be cleaned up in time so that people can clear the site


Applications

wet scrubber application

More products: 

  Baghouse Dust Collector, Cyclone Dust Collector, Welding Fume Extractor, Fog Cannon, Bulk Material Handling Equipment


spray tower

spray tower scrubber


Home> Products> Industrial Dust Collector> Wet Scrubber> High Quality Waste Gas Wet Scrubbers
Send Inquiry
*
*

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Send